- -25%
Shuttles LED light will be perfect for your crops.
-20% | €270 |
-15% | €286.88 |
-10% | €303.75 |
-7.5% | €312.19 |
-5% | €320.63 |
Shuttles LED lamp has an ideal light spectrum for growing fruits from cuttings or seeds.
In order to provide the optimum conditions, it is best to ventilate the cooling elements with a slight air flow, for example, with the help of a fan. This will reduce the temperature of the cooling elements to 15°C.
Since plants stop growing at temperatures of 30 to 32°C, it is advisable to keep the temperature at about 17 to 23°C and avoid temperatures above 28°C.
On this model, the power can be adjusted from 10 to 100% by the potentiometer (regulator). The distance between the LED lamp with 100% power operation with a minimum distance of 40cm for the highest plant to avoid potential risk of exposure to radiation too high. However, if the power of the lamp is decreased to 30%, the distance can also be reduced.
It is imperative to protect the regulator from humidity, especially when cleaning your lamp or plants (problem following this, not covered by the warranty). Use it only when really needed.
IMPORTANT INFORMATION:
For the 3-year warranty to work, it is essential to register your device or have the warranty card stamped by the dealer with the date of purchase and to present it in case of a claim.
Composition
The processed components come from well known manufacturers such asOsram and Lumileds.
Advantages:
Model | LED Shuttles 6 Dimmable 240W |
Input voltage | 220-240V |
Power consumption | 1.15A |
Power | 240 W |
PPF | 552 μmol/sec |
Luminous efficiency | > 2.3 μmol/J |
Light source | LUMILEDS + Osram |
Light angle | 120° |
Protection class: Dimmable Non-dimmable |
IP40 IP65 |
Weight | 5.5Kg |
Power factor | 0.95 |
Operating temperature | -20°C to +40°C |
Safety advice:
Do not use this lamp outdoors and do not expose it to moisture.
It is important to always unplug the lamp when cleaning or exchanging modules.
Always unplug the lamp when cleaning or exchanging modules. Protect your eyes with safety glasses when using the lamp.
Exposed platinum contacts of the lamp must be covered with attached stickers before the product can be used again.
The intelligent power driver automatically adjusts the lamp power according to the number of integrated modules.
The lamp should not be used with unprotected contacts due to the risk of electric shock.
Check and clean the modules every 3 months. Wipe the polycarbonate cover of the LED lamp only with a cotton or microfiber cloth and a mild detergent (a lens wiper). Never use detergents containing solvents!
Except for the case mentioned above, the lamp is maintenance-free.