The Bullgenius controller allows ventilation management of up to 4 connections simultaneously.
Thanks to the thermal sensor, it's easy to make pre-settingscis thanks to the thermal sensor, it's easy to pre-set the ventilation speed, and to select the ambient temperature.
It's also possible to set an alarm system, in case the temperature is too high.
When the temperature in the growth chamber exceeds the desired level, the Bullgenius automatically accelerates the speed of all connected fans, for pre-set adjustmentcis
There are 2 modes, auto and manual.
Auto mode: In auto mode, the intelligent controller automatically adjusts the speed of the connected fans to the desired temperature.
Manual mode: The manual mode enables the intelligent controller to set a regular speed for the connected fans.
The power supply works directly in connection with a fan, without batteries or mains cables
Wall-mountable digital box.
A security function enables complete locking of the device.
A fault detection function can be activated.
Specific connection for Bullfan/Bullmax V2
To connect the fan to a controller other than Bullgenius, here are the mini jack adapters Bullfan :
Thermal probe with 6 m cable:
Enables recording of temperature changes in the grow room.
Example of connections:
Digital display :
The speed level setting is not differentiable on the 4 channels, so if 4 identical BULLFAN/BULLMAX are connected, the setting will apply in the same way to all 4 channels, giving the same flow rate.
To create a vacuum using a controller and several aerators in the same growing space using the BULLGENIUS , you'll need to differentiate between extractor and intractor sizes, and use the most powerful aerators for extraction and the least powerful for intraction.
Channels 1 and 2: BULLFAN 200 1205m3/h = EXTRACTION
Channels 3 and 4: BULLFAN 150 596m3/h = INTRACTION