This electronic / digital ballast of the brand Calitek has the possibility according to your needs to go from 250w to 660w. It has a high power factor and a high luminous efficiency as well as a low THD(Total Harmonic Distortion). It is designed to work with lamps, MH (Metal Halide) and HPS (High Pressure Sodium).
| -20% | CHF103.20 |
| -15% | CHF109.65 |
| -10% | CHF116.10 |
| -7.5% | CHF119.33 |
| -5% | CHF122.55 |
CK-600R V4 Electronic / digital ballast of the brand Calitekthe CK-600R V4 is an electronic/digital ballast for MH-HPS horticultural lamps with a high power factor, high luminous efficacy and low THD(Total Harmonic Distortion), not to mention a more than satisfactory energy saving.
Equipped with ignition failure protection, open circuit protection and end of lamp life protection technology, this ballast Calitek CK-600R V4 ballast will not short circuit.
It is compatible with MH (Metal Halide) and HPS (High Pressure Sodium) bulbs, and its high operating frequency (60KHZ - 130KHZ) gives the lamp a constant power output, while extending its life and increasing its luminous efficiency.
This ballast is capable of operating in a power range of 175-265V.
Make sure the lamp wattage and voltage match the ballast specifications.
To be on the safe side, be sure to read the instructions that came with the product or can be downloaded from this page.
CK-600R V4 Specifications:
| Model | CK-600R V4 | |
| Lamp | 250W-400-600W MH-HPS lamps | |
| Input power | 680W | |
| Input voltage range | 175-265V | |
| Input voltage | 220-240V | |
| Input current | 3A | |
| Input frequency | 50/60Hz | |
| Max power output | 660W | |
| Output frequency | 60KHZ | |
| Drive operation | 250W-275W-400W-440W-600W-660W | |
| Leakage current | 2.35mA | |
| Total harmonic distortion | <8% | |
| CF Lamp / peak factor | <1.6 | |
| Power Factor | >0.98 | |
| Open circuit voltage | 250Vrms | |
| Operating frequency | 60KHZ - 130KHZ | |
| Ignition voltage | 3.5KV-4KV | |
| Ignition time | 30MS | |
| Inrush current | 6.5A | |
| Current protection | 5A | |
| Insulation resistance | 5MΩ | |
| Insulation voltage | 3.5KV | |
| Fault detection | yes | |
| Lamp power | Constant | |
|
Lamp flicker - acoustic resonance |
No | |
| RF interference | No | |
| Max. housing temperature | 80°C | |
| Ambient temperature | -25 to 40°C | |
| Operating humidity | 20%-95% | |
| Environment IP requirement | IP23 | |
| Unit weight | 2Kg | |
| Unit dimensions | 280x114x81mmm |
2 years warranty
